Black Widow Security BW X-Z Series Manual de instalación descargar pdf (Pagina 5)

COLD START ACTIVATION

Automatically starts engine every 1 or 2 hrs. for 24 hrs. max.

While pressing brake pedal, push program switch then

press transmitter button 2. The parking lights will flash

5 times and remain on. Engine will start and run for 30

seconds to confirm activation, then shut down. Once

activated the engine will start automatically and run

for the preset run time.

COLD START DEACTIVATION

The Cold Start feature can be deactivated by stepping

on the brake pedal, turning on the ignition, or remote

starting the vehicle using the transmitter.

WIRING HARNESS

RED

YELLOW

IGNITION #1 OUTPUT

BROWN

IGNITION #2 OUTPUT

RED

CONNECT EACH DIRECTLY

TO THE BATTERY (See page 2 )

GREEN

DOOR TRIGGER (-)

VIOLET

DOOR TRIGGER (+)

BLACK

GROUND INPUT

ORANGE

ARMED OUTPUT/

GROUND WHEN RUNNING (-)

WHITE

PARKING LIGHT OUTPUT (+)

RED

+12V INPUT

HOOD SWITCH INPUT(-)

BLUE

BROWN

SIREN OUTPUT(+)

GRAY

TACH/SPARK SENSE (-)

VIOLET

STARTER OUTPUT

ORANGE

ACCESSORY OUTPUT

YELLOW

BRAKE SWITCH INPUT (+)

BLUE

GREEN

RED

UNLOCK(-)

+12V

LOCK(-)

DIP SWITCH SETTINGS

Default settings from

factory are ON

1. ON = Normal operation

OFF = Diesel mode - ignition will turn ON

several seconds before starting vehicle.

2. ON = Normal operation

OFF = Vacuum switch mode - reads YELLOW wire

(3-pin accessory plug) for optional vacuum switch

3. ON = Normal operation

OFF = Extend cranking time - automatically adjusted

4. ON = Dip switch #2 selection (normal/vacuum)

OFF = Tach/Spark sense - reads GRAY tach/spark

sense wire.

CONNECTORS

TRUNK OUTPUT (-)

1 2 3 4

GREEN/BLACK

LED

SWITCH

RF RECEIVER

SHOCK

SENSOR

PLUG

SECURITY/REMOTE START WIRING DIAGRAM

1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios

Black Widow Security BW X-Z Series Manual de instalación Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Arrancadores remotos Black Widow Security BW X-Z Series