Black Widow Security BW RAS 100 Manual de instalación

Busca en linea o descarga Manual de instalación para Los Sistemas De Control De Acceso De Seguridad Black Widow Security BW RAS 100. Black Widow Security BW RAS 100 Installation manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 7
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
BEFORE INSTALLING THE STARTER DISABLE/KEYLESS ENTRY SYSTEM
DO read through this installation manual.
DO NOT install the control module in an engine compartment.
The alarm may arm itself when power is first connected.This is a normal condition.
ITEMS SUPPLIED WITH THE STARTER DISABLE/KEYLESS ENTRY SYSTEM
Receiver and control module Valet/override switch
Two 2-Button or 3-button, code learning LED status indicator
transmitters
Wiring harness, fuseholder, & fuse
Door lock harness
OPTIONAL ACCESSORIES
Backup battery...............................................BWS-500 Window roll up...........................................................WRM-2
Remote starter ..............................................RAS-101 Power door lock.........................................................PDL-50
Trunk release .....................................................TR-100 Relay ....................................................................................SPDT
Starter disable relay socket.........................BRS-003 5-wire door lock relay & socket ...............BRS-008P16
(+) door lock Inverter..............................BW-34516
SPECIFICATIONS
Operating voltage..................+12 VDC Neg. Ground
Code learning..........................................3 Codes Max.
Current consumption............5 mA (max) disarmed.
Door lock/unlock output .........................(-) 500 mA.
Channel 2 output drive.............(-) 500 mA variable.
Remote control transmit frequency.......................310 mHz.
Passive arming delay..................................30 Seconds approx.
Auxiliary output drive...............................250 mA maximum.
Flashing output drive .................................(-) 250 mA 30 sec.
Dome light output......................................(-) 250 mA 30 sec.
INSTALLATION MANUAL
STARTER
DISABLE/
KEYLESS
ENTRY
SYSTEM
INSTALLATION MANUAL
Vista de pagina 0
1 2 3 4 5 6 7

Indice de contenidos

Pagina 1 - INSTALLATION MANUAL

BEFORE INSTALLING THE STARTER DISABLE/KEYLESS ENTRY SYSTEM•DO read through this installation manual.•DO NOT install the control module in an engine co

Pagina 2

- 1 -INSTALLATION INSTRUCTIONSIMPORTANT:Make all wiring connections to the vehicle before connecting the main 6-pin harness and all plug-in connectors

Pagina 3

- 2 -11. Connect the Main 6-Pin Wiring Harness and all pin connectors to the Control Module. Install the fuse in the RED wire of the main wiring harne

Pagina 4

- 3 -CONNECTOR PIN NUMBERS AND WIRE COLOR CODES6 PIN HARNESSPIN Wire Color Function1) Red Main Power hook to constant 12v+ source2) Brown Negative Ou

Pagina 5 - RECEIVER

BLUEGREENREDLOCK (-) PULSE+12V CONSTANT OUTPUTUNLOCK (-) PULSERECEIVERMODULEVALET SWITCHLEDSTARTER DISABLE INPUT/OUTPUTS}WIRING HARNESS2nd CHANNEL (-)

Pagina 6 - DIAGRAMS:

87858687a3087858687a3087858687a3087858687a3087858687a30X CUT X X CUT X 87858687a3087858687a30- 5 -POWER DOOR LOCKDIAGRAMS:The Starter Disable/Keyless

Pagina 7 - 752/1/L Rev.7 091997

PROBABLE SUGGESTEDSYMPTOM CAUSE CORRECTIONKeyless will not go RED or YELLOW wire not connected RED wire should connect directly tointo Code Learning

Comentarios a estos manuales

Sin comentarios