
PAGE-18 UPDATED 11-5-2014
STEP 4: Attachment of RED WIDOW mounting system
4.1
Remove the outer film from the adhesive butyl located at the bottom of the base plate.
4.2
Configure the Red Widow mount in the removed section of the composite.
4.3
Use a cordless impact wrench fitted with ¼” Socket to secure the mount to the roof deck with *
(12 x 1-1/2”) screws included with the mount.
All screws must be torque to 14 ft-lbs.
* California: 5 Screws
* Florida: 8 Screws
* Hawaii: 8 Screws
* Texas: 6 Screws
Patent pending P/N: RW-S, RW-B.
Comentarios a estos manuales