Black Widow Security BW 3 Channel Manual de usuario Pagina 20

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 29
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 19
PAGE-20 UPDATED 11-5-2014
STEP 5: Install flashing
5.1
Apply flashing mastic to the bottom of the flashings perimeter to create a water tight seal on all three
outer edges of the flashing.
5.2
Position the flashing above the base plate with the three outer edges of the flashing under the layer of
composite shingle.
5.3
Ensure that the layer of composite shingle sets flush with the raised portion of the flashing. Upon
completion it should appear as shown.
CAUTION: Flashings may have sharp edges.
Wearing safety gloves is recommended while
handling flashings.
Patent pending P/N: RW-S, RW-B.
Vista de pagina 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 28 29

Comentarios a estos manuales

Sin comentarios