Black Widow Security BW FM 250 Manual de instalación descargar pdf (Pagina 15)

If the power trunk re-lease

requires a positive pulse to

operate, use this circuit.

2nd CHANNEL

AUXILIARY

(GRAY WIRE)

12V

POSITIVE

OUT TO TRUNK 12V

FOR POSITIVE

PARKING LIGHTS

TRUNK RELEASE

CIRCUIT DIAGRAM:

VEHICLE

PARKING

LIGHT

WIRE

WHITE

8586

87a

FOR NEGATIVE

PARKING LIGHTS

(MOST

JAPANESE

VEHICLES)

8586

87a

TO VEHICLE

PARKING

LIGHT

CIRCUIT

WHITE

STATUS INDICATOR (LED) FUNCTIONS

Off= System off in Active Mode

Slow Flash= System Armed

Rapid Flash= Passive Pre Arm State

Rapid Flash (after disarm)= System was trig-

gered

On Solid= In Valet or Service Mode

On Solid= (After passive prearm or active

arm) 10 second final prearm state

On Solid= (when disarmed, and not in

Valet/Service Mode) -Input is open. See Test

Mode.

SILENT TEST MODE

When the system is disarmed the LED will

go solid every time an input is triggered. You

can check the shock sensor, doors, hood,

trunk, and the auxiliary sensor input as well.

SIREN CHIRP STATUS

1 chirp= system armed

2 chirps= system disarmed

3 chirps= System disarmed, but alarm was

triggered while away.

4 chirps= Alarm armed but there is a trigger

that remains open. (This occurs 25 seconds

after system was armed)

5 rapid chirps= Alarm armed, shock sensor

warn away output was triggered.

DIP SWITCH PROGRAMMABLE FEATURES

Switch Description ON OFF

#1 Lock/Unlock Pulse Time .75 seconds 3 seconds

#2 Ignition Triggered Door Locks Feature On Feature Off

#3 Passive Door Locks Feature On Feature OFF

#4 Passive or Active Arming Passive Arming, Active arming

1 2 ... 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios

Black Widow Security BW FM 250 Manual de instalación Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Black Widow Security BW FM 250