Black Widow Security BW FM 250 Manual de instalación descargar pdf (Pagina 8)

to control via the 3rd channel. Ideal for

window roll up or remote start.

To use this feature press both buttons

1&2 on 2 button remote control.

NOTE: This output will work with the

ignition on or off. It will provide output

on the Yellow wire as long as you hold

transmitter button #3.

20. Connect Horn Honk out-

put: Red wire on 3 pin

accessory connector

Connect the red wire to a relay that

honks the factory car horn. In many vehi-

cles this wire can be found off of the

main harness at the steering wheel or

ignition harness. Add a SPDT relay if you

are connecting directly to the car horn.

21. Connect the door lock

wires: Blue and Green on 3 pin

harness.

The blue wire provides a 500 ma negative

pulsed output for unlock, this output is

designed to drive a relay. See diagram sec-

tion.

The green wire provides a 500 ma nega-

tive pulsed output for lock, this output is

designed to drive a relay. See diagram sec-

tion.

The Red wire provides a constant +12V

to use for triggering relays, door lock

modules, or inverters.

22. Plug in main harness and

3 pin door lock harness and 3

pin accessory connection to

module.

23. Test features and function,

adjust shock sensor.

Arm and disarm system, check that the

siren chirps and parking lights are func-

tioning normally. Make sure that the pro-

grammed features (via dip switch ) are

performing correctly-ignition locks, pas-

sive arming, passive locks, etc.

Test the doors and hood or trunk inputs

(make sure that you check that all doors

trigger the system not just the drivers

door), you can do this with the Silent Test

Mode.

Adjust the shock sensor (clockwise for

more sensitive, counter clockwise for less

sensitive) , make sure that it is not too

sensitive.

Arm the system and try and start the

vehicle, it should not start.

Arm the system and disarm it with the

ignition and override switch.

If programmed to passively arm make

sure that the system properly arms.

Check for range with the remotes that

they arm and disarm all the way around

the vehicle- adjust antenna location if nec-

essary.

8

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios